To make a call
To make and receive calls,
• the phone must be switched on,
• the communicator must have a valid SIM card fitted, and
• you must be located in a service area of the wireless network.
Tip: When a call is active,
you can use the
and
keys to lower or raise
the volume level of the
earpiece.
1 Key in the area code and the phone number of the person you wish to call. If
you make a mistake, you can remove the digits one at a time by pressing Clear
repeatedly. To clear the whole display, press and hold Clear.
2 Press
to dial the phone number.
3 To end the call, press
.
Note: The microphone and earpiece are on the rear of the device.
©2001 Nokia Mobile Phones. All rights reserved.
43
Pho
n
e
International calls
When making international calls, start by pressing
twice quickly. The
international call character ‘+’ appears on the display, which informs the network
centre to select the international dialling prefix.
After this you can enter the country code, area code and phone number.
To search for phone numbers
You can retrieve phone numbers from memory by the name with which the phone
number was stored. For more information , see ‘To call a number in the Telephone
directory’ on page 70.
Tip: To choose which
memory to use, press
Names, scroll to Options and
press Select twice. Scroll to
choose Device, SIM card, or a
and press Select.
1 Press Names.
2 Scroll to Search and press Select.
3 Key in the name of the person whom you want to call, or the first letter(s) of
the name.
4 Press Search. The name closest to the keyed characters will appear.
5 If the name found was not the one you searched for, scroll through the names
with
and
until you reach the correct one.
6 Press Details to view the details of the highlighted name, or
press
to call the person. If the person has several numbers, scroll the
selection frame onto the one you want and press
.
©2001 Nokia Mobile Phones. All rights reserved.
44
Pho
n
e
To speed dial
Speed dialling is a handy way to call frequently-used phone numbers. You must
enable speed dialling, see ‘Call settings (3-1)’ on page 56. You can define up to
eight speed dial numbers in the communicator memory. For information on how
to set speed dials, see page 82.
Example: Press 2 if the
speed dial location for the
phone number is 2.
1 Key in the number of the speed dial location where you have stored the phone
number.
2 Press
. The phone will display the phone number briefly, and then dial it.
Tip: Pressing and holding
dials your voice
mailbox number.
Speed dialling is not possible during a call.
To call service numbers
Your service provider may have stored service numbers on your SIM card. For more
information, see ‘To call a number in the Telephone directory’ on page 70.
1 Press Names.
2 Scroll to Service Nos. and press Select.
3 Scroll to the service number and press
to call the number.
To send DTMF tones
If you need to send long DTMF sequences, it is more convenient to send them via
the communicator interface, see ‘To send DTMF tones during a call’ on page 77.
1 Make the call to the desired phone number.
2 Key in the digits you want to send as DTMF tones. The digits are sent one by
one to the network.
©2001 Nokia Mobile Phones. All rights reserved.
45
Pho
n
e